Best Wheels for Toyota Supra A80 / JZA80: Fitment Guide Australia

Home › Wheel Fitment Guides › Toyota Supra A80 / JZA80 Wheels › A80 Supra Fitment Guide

The Toyota Supra A80 / JZA80 uses a 5x114.3 PCD and is one of the classic platforms for staggered genuine JDM wheel fitment. Factory Turbo models used a staggered 17-inch package, while 18- and 19-inch wheels are common on modified street cars.

Toyota Supra A80 / JZA80 wheel fitment basics

• Generation: A80 / JZA80 Supra
• PCD: 5x114.3
• Common aftermarket diameters: 18 and 19 inch
• Staggered front/rear setups are common
• Front brake and rear guard clearance should be checked separately

Shopping for A80 Supra wheels now? Browse the dedicated Toyota Supra A80 / JZA80 wheel collection → or compare the broader 5x114.3 wheel range.
Need something held locally? Check Sydney Stock → or send us your vehicle details for fitment help.

17-inch A80 Supra wheels

A useful factory Turbo reference is 17x8 front and 17x9.5 rear. This provides a useful baseline when comparing how wider aftermarket wheels and lower offsets change inner and outer position.

18-inch A80 Supra wheel fitment

Eighteen-inch wheels are one of the most common aftermarket performance directions. They retain useful tyre sidewall while opening up a large range of genuine Japanese staggered fitments.

19-inch A80 Supra wheel fitment

Nineteen-inch setups are also used on modified street and show builds. They reduce tyre sidewall and clearance margin, so tyre size, ride height and offset need to be planned together.

Safe vs aggressive A80 Supra fitment

Safe / OEM+ starting point: for an 18-inch stagger, 18x8.5 around +30 to +35 front and 18x9.5 around +30 rear is a conservative genuine-wheel direction, subject to the exact brake package and tyre size.

Performance direction: wider staggered packages can support more tyre while retaining practical clearance when front and rear offsets are chosen specifically for the A80 chassis.

Aggressive / modified-car direction: real modified Supra builds use fitments around 18x9.5 +21/+22 front and 18x10.5 around +14 to +22 rear. HausofWheels has also specified an 18x9 +19 front / 18x10 +24 rear package. Treat these as aggressive references requiring tyre, guard, suspension and brake-clearance checks rather than guaranteed bolt-on sizes.

Popular genuine JDM wheels for A80 Supra

RAYS TE37, WORK Meister and VS-series, SSR Professor, BBS and Enkei are natural A80 choices.

Brake, tyre and suspension checks

Check the front and rear wheel package together. On a staggered Supra setup, front brake clearance, rear guard clearance, tyre width, suspension height and front-to-rear balance all matter. A specification that works at one end of the car should not be assumed to suit the other.

A80 Supra wheel fitment FAQ

What PCD does the Toyota Supra A80 / JZA80 use?

The A80 / JZA80 uses 5x114.3. PCD alone does not confirm fitment, so wheel width, offset, tyre size and brake clearance still need to be checked.

Are 18-inch or 19-inch wheels better for an A80 Supra?

Eighteen-inch wheels are the most common aftermarket performance direction in this guide. Nineteen-inch fitments are also used, while the factory Turbo package provides a useful 17-inch staggered baseline.

Can A90 / A91 GR Supra wheel specs be copied to an A80?

No. The A80 / JZA80 and A90 / A91 are separate platforms with different PCD and fitment paths. See the GR Supra A90 / A91 fitment guide for the later car.

Do staggered A80 Supra wheels need separate front and rear checks?

Yes. Treat the front and rear as a complete wheel-and-tyre package and verify brake, suspension and guard clearance at both ends.

Shop A80 Supra wheels in Australia

Browse the dedicated Toyota Supra A80 / JZA80 wheel collection, or compare current RAYS, WORK and SSR wheel options.

Shop wheels for this vehicle →

Staggered Supra fitment should always be checked front and rear as a complete wheel-and-tyre package.