GR86 & BRZ 18x8.5 +45 vs 18x9.5 +38: Wheel Fitment

Toyota GR86 and Subaru BRZ fitment reference car photo; guide compares two 18-inch wheel specifications

Choosing between 18x8.5 +45 and 18x9.5 +38 for a Toyota GR86 (ZN8) or Subaru BRZ (ZD8)? Both can be found in 5x100 aftermarket wheel catalogues, but they are very different fitment decisions. The narrower +45 setup is the more conservative place to start. The wider +38 setup moves the rim substantially farther toward the guard and is not a safe assumption for an unmodified car.

This guide shows the calculated wheel-position difference, explains where the two setups can conflict with the car, and helps you decide what information to check before ordering genuine JDM wheels in Australia.

Quick answer: which size is more conservative?

  • 18x8.5 +45: A modest width increase over an 18x7.5 +48 reference wheel. Tyre choice and brake design still need verification, but the wheel's geometry is less aggressive.
  • 18x9.5 +38: A track- or modified-street-oriented width and position. Expect to investigate front spring or coilover clearance, wheel-arch and rear bumper-tab clearance, ride height, alignment and tyre shape. Do not assume stock-suspension fitment.
  • Both: Must be the correct 5x100 bolt pattern, with suitable centre-bore/hub centring, nuts, load rating and verified brake clearance. Matching PCD does not establish fitment.

18x8.5 +45 vs 18x9.5 +38: how far do they sit out?

For a consistent comparison, use a common 18x7.5 +48 factory-style 18-inch wheel as the starting reference. These are nominal rim-position calculations, not measured tyre or body clearances. One inch of rim width equals 25.4 mm.

Wheel specification Outer rim position vs 18x7.5 +48 Inner rim position vs 18x7.5 +48
18x7.5 +48 reference Baseline Baseline
18x8.5 +45 15.7 mm further outward 9.7 mm closer to suspension
18x9.5 +38 35.4 mm further outward 15.4 mm closer to suspension

Direct comparison: changing from 18x8.5 +45 to 18x9.5 +38 adds 19.7 mm of outward rim extension and moves the inner rim 5.7 mm closer to the suspension. The calculations use half the increase in wheel width, plus or minus the change in offset. Actual clearance also depends on rim shape and tyre dimensions.

Will 18x9.5 +38 fit on stock GR86 / BRZ suspension?

Do not buy an 18x9.5 +38 set solely because another GR86 runs a similar size. APEX's dedicated second-generation GR86 fitment guide describes an 18x9.5 +40 setup as aggressive and needing substantial vehicle changes for its particular wheel and tyre configuration. Detailed documented examples from System Motorsports likewise depend on coilovers, alignment and, in some cases, body trimming even around 18x9.5 +40. At the same width, +38 brings the outer rim another 2 mm toward the guard compared with +40.

Those examples are useful evidence of the clearance questions to investigate, not certification for a different manufacturer's wheel. Spring perch shape, aftermarket coilover body, tyre sidewall, camber setting, full-lock clearance and rear bumper-tab geometry vary. A wheel can clear the strut and still foul the guard under steering or compression.

What tyre size should you consider?

The suitable tyre is not determined by wheel width alone. For an 18x8.5 wheel, owners often investigate 225-section performance tyres. For 18x9.5 setups, 245- and 255-section tyres appear in enthusiast fitment examples, but their actual section widths and shoulder shapes vary by brand and model. These are research starting points, not universal tyre recommendations. Confirm each tyre maker's approved rim-width range, load and speed ratings, overall diameter and clearance on your exact car with a qualified tyre professional.

Wider tyres can make a borderline wheel fitment rub even where the bare rim appears to clear. They also alter steering feel and may require alignment or body changes. We sell wheels, not tyres, and do not provide test fitting.

What if your GR86 or BRZ has Brembo brakes?

Wheel diameter, PCD and offset do not prove caliper clearance. Two wheels with identical 18x8.5 +45 dimensions can use different spokes, hub-pad shapes and inner barrels. Request a wheel-specific brake template or verified clearance evidence for the exact wheel and brake package. Read our GR86 and BRZ Brembo clearance guide before considering any aftermarket wheel.

Which genuine JDM wheel options can you compare?

Browse GR86 / BRZ wheel listings and the full 5x100 wheel collection. For a specific example of the narrower geometry, there is an Enkei PF09 18x8.5 +45 5x100 listing (marked Available to Order; stock and ETA require confirmation). For a wider alternative close to the comparison, view RAYS TE37 Saga SL M-Spec 18x9.5 +40 5x100. These examples illustrate different dimensions and designs; neither is declared a confirmed direct fit on every GR86 or BRZ.

For more context, see the full GR86 / BRZ fitment hub and the 57NR 8.5J vs 9.5J comparison.

Before ordering: a practical checklist

  1. Confirm GR86 ZN8 or BRZ ZD8 year, grade and factory or upgraded brakes.
  2. Record the exact wheel model, front and rear width, offset, PCD and centre bore—not just the general model name.
  3. Check whether the suspension is standard springs/struts or aftermarket coilovers, plus ride height and alignment.
  4. Check intended tyre model and dimensions, including loaded and full-steering-lock clearance.
  5. Ask about stock, lead time, included caps and nuts, and order requirements before payment.

For a wheel-specific enquiry, contact HausofWheels with those details. We supply genuine JDM wheels and can help narrow the required checks; we do not offer test fitting or tyre installation. Hurstville pickup is by confirmed appointment when your order is ready.

Sources and methodology

Wheel position figures are calculated using published rim-width and offset geometry. The fitment cautions are informed by the APEX second-generation GR86 fitment guide and System Motorsports' documented GR86/BRZ wheel-fitment examples. These third-party reports describe their own wheel designs and vehicles; they are not manufacturer clearance certificates for the wheels sold by HausofWheels. This article was prepared with research assistance and checked against those sources; it is not a record of a HausofWheels physical test fitting.

Back to blog

Genuine wheel fitment

Find the right wheels for your car

Browse genuine wheels currently available to order, then use our fitment guides to narrow down PCD, size and offset for your exact vehicle.

Need help applying this guide to your car? Ask HausofWheels about this fitment guide →