WedsSport TC105X vs TC105X DSR: Sizes, PCD & Brake Fitment
Is the WedsSport TC105X DSR different from the original TC105X, and will it fit your car? This guide compares the construction, exact wheel sizes in HausofWheels' catalogue and the measurements buyers need before ordering. Both are genuine Japanese performance-wheel families; sharing a model name does not make every size interchangeable.
TC105X versus TC105X DSR: the manufacturer's distinction
WEDS describes the original TC105X as a motorsport-oriented wheel with AMF (Advanced Metal Forming) technology, spoke weight-reduction details and an inner barrel profile developed with brake packaging in mind. The DSR name means Double Shift Rim. WEDS describes a revised rim structure that forms both outer and inner rims for selected configurations, and specifies double AMF applies to 9.0J and wider sizes. A narrower DSR-labelled size should not automatically be marketed as having the same double-formed construction.
Read the official TC105X manufacturer reference and TC105X DSR technical information for the exact variant. Wheel weights, face profile and brake clearance change with size; don't apply a quoted weight or face type to every wheel.
Actual 18-inch WedsSport TC105X specifications to compare
| Configuration | PCD | What to confirm |
|---|---|---|
| TC105X DSR 18x8.5 +43 | 5x100 | Correct 5x100 hubs, brakes and offset |
| TC105X DSR 18x8.5 +43 | 5x114.3 | Different PCD; not interchangeable with the 5x100 version |
| DSR 18x8.5 +43 front / 18x9.5 +45 rear | 5x114.3 | Staggered widths, axle-specific brake and tyre clearance |
| TC105X 18x9 +25 front / 18x10 +20 rear | 5x114.3 | Lower offsets and wider rear; specialist fitment |
These are wheel specifications, not vehicle fitment approvals. Compare the TC105X collection for current product listings and availability. Enquire for Stock / Available to Order sets should not be assumed physically held in Hurstville.
Why 5x100 and 5x114.3 are not interchangeable
The 5x100 and 5x114.3 measurements describe different bolt circles. A matching diameter, width and offset cannot overcome an incorrect PCD. Confirm the exact generation/year and hub setup; if the car has been converted, verify its current hardware. See our 5-stud PCD explanation.
How a staggered set affects wheel and tyre selection
With an 18x8.5 +43 front and an 18x9.5 +45 rear, the rear wheel is 25.4mm wider at the bead seat and has 2mm more positive offset. If compared on the same hub, its nominal outer edge would extend about 10.7mm farther out and its inner edge about 14.7mm farther in. Those numbers do not represent actual front-to-rear vehicle clearance, because axles, suspension and guards differ.
Check rolling diameter compatibility for AWD systems where applicable, tyre measured width, sidewall, camber and suspension travel. Read our square versus staggered wheel guide.
Does an 18-inch TC105X automatically clear Brembos?
No. Diameter and PCD do not specify spoke-to-caliper clearance, centre-disk depth or inner-barrel profile. The actual brake template for the exact TC105X size and face must be checked against the vehicle's rotor and caliper combination. Our brake clearance explainer details these checks.
TC105X ordering checklist
- Confirm model/year, factory or modified PCD and hub bore.
- Check the front and rear wheel size and offset separately.
- Verify the exact face/centre disk and brake template.
- Check tyre size, load capacity and rolling diameter.
- Measure strut, guard and full suspension-travel clearance.
- Enquire for stock, ETA and current order terms.
Browse WedsSport wheels, 18-inch 5x100 or 18-inch 5x114.3 options. Send HausofWheels your exact vehicle specifications for an enquiry. We supply wheels only; we do not provide physical test fitting.